Photo via: craftthyme.com
You may also be interested in 🙂
New listing! I recently had a custom order for 2 Walnut guitar hangers. They turned out so nice I decided to add them to the available woods. As with all woods each piece will be unique with variations in the color and the wood grain. I make these wall hangers one at a time. The design is mine and really displays the instrument in a way that could be used in a dedicated music room, den or accent a wall in a living room. In selecting wood, I remain Eco-friendly, hand picking the woods used. They are constructed with glue and biscuit joints, then sanded, sealed, clear stained and then polished to a satin finish. A strip of felt is then attached to the inside of the hanger to protect the neck of the instrument. Wall mounting is accomplished with screws into studs or between studs with molly type fittings. The heads of the screws fit into two key holes on the back of the hangers so no mounting type is visible.
How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes less than one hour. This design works great for above and in ground swimming pools. http://www.diyeasycrafts.com/
To reclaim the pallet wood is one of the most creative things and with this splendid art you can really make the wonders happen. Some of the crucial critiques still don’t buy the argument and the strongly opine that the creations made out of the wooden pallets cannot be a proper substitute of the proper branded wooden furniture articles.
Apply a thin bead of paintable acrylic latex caulk only inside the crack where wood meets a wall for a smooth, professional appearance. Remove extra caulk with a putty knife. And buy a dripless caulk gun to save time and frustration. Cut the tip smaller than you think you need.
